Home / Resources / Buyer questions
Buyer questions

Fiber laser buyer questions, answered

Straight answers before you buy. Each one starts with the short version. Can't find yours? Call or text 520-500-7454.

Question 01

What comes with a fiber laser?

Short answer

Every fiber laser we sell ships with a water chiller, an exhaust fan, a 16-bar rotary screw air compressor, a transformer and the required parts. On-site installation and operator training by our team are included too. Everything you need to cut on day one, with nothing to hunt down.

  • Fiber laser machine
  • Water chiller: keeps the source and head cool
  • Exhaust fan: clears fumes from the cutting area
  • 16-bar rotary screw air compressor
  • Transformer, plus required parts
  • On-site installation and operator training by our team
Question 02

How does a fiber laser work?

Short answer

The beam is generated through a fiber-optic cable, then focused through a cutting head. It melts or vaporizes the material along a programmed path. The CNC controller moves the head over the sheet, plate or tube to cut your parts.

  • Laser source: generates the beam.
  • Fiber-optic cable: carries the beam to the head.
  • Cutting head: focuses the beam onto the material.
  • CNC controller: follows the programmed cutting path.
  • Support equipment: water chiller, exhaust fan and air compressor keep it running.
Question 03

Fiber laser vs CO2 laser: which should I buy?

Short answer

Fiber is newer, more advanced technology. It skips the upkeep older CO2 systems demand. For cutting metal, we supply fiber lasers only, sized to the material and volume you run.

The beam is generated through a fiber-optic cable, then focused through a cutting head. It melts or vaporizes the material along a programmed path.

Question 04

Flatbed vs enclosed fiber laser: which fits my shop?

Short answer

A flatbed fiber laser cuts sheet and plate on an open bed, starting at 2 kW. An enclosed shuttle table laser adds a full enclosure and a dual shuttle table, built for high-volume sheet with safety and fume control. Pick by your volume, your floor space and how you want to load parts.

  • Power: 2 kW and up
  • Bed: 5' x 10' standard, custom sizes available
  • Built for sheet and plate, open bed
Question 05

Do I need a tube laser or a combo machine?

Short answer

A tube laser cuts tube and pipe only, for frames, railings and structural parts. A combination machine, an integrated flatbed and tube cutter, cuts both sheet and tube on one machine. If most of your work is tube, get a tube laser; if you run a steady mix of sheet and tube, look at a combo.

  • Power: 3 kW, 6 kW or 12 kW
  • Tube length up to 20' standard, custom lengths available
  • 2, 3 or 4 chucks; 5-axis upgrade for bevels
Question 06

What size bed do I need on a fiber laser?

Short answer

The sheet you buy most sets the bed. Flatbed lasers come in 5' x 10' standard, with custom sizes available. For large-format sheet, gantry lasers come in 5' x 10', 6' x 12', 8' x 20' and 10' x 20', with other sizes configured to order.

  • 5' x 10' standard
  • Custom sizes available
Question 07

How much laser power do I need?

Short answer

Match power to your work, not to a number. The thickest steel you cut sets your minimum power, and your parts per day set the speed you need. Power starts at 2 kW; tell us your thickest steel and we size the source to it.

  • Thickest steel you cut: sets your minimum power.
  • Parts per day: sets the speed you need.
  • Materials you run: mild steel, stainless, aluminum, copper, brass, galvanized steel, titanium.
Question 08

How do I prepare my shop for a fiber laser?

Short answer

Prep before the truck arrives, so your machine runs the day it is set. Plan electrical service at the machine location, compressed air, assist gas, an exhaust ducting path, floor space, and unloading and rigging. Ask us for the exact requirements for your model.

  • Electrical service at the machine location
  • Compressed air supply
  • Assist gas supply, regulators and hoses
  • Exhaust ducting path
  • Floor and clear space for your model
  • Unloading and rigging
Question 09

Who handles fiber laser delivery, unloading and rigging?

Short answer

We deliver to the location you specify, quoted delivered to your door (DDP) whenever we can. Forklift, crane, rigging and equipment needed to unload and position the machine are your responsibility unless we agree otherwise in writing. Your written quote states the exact delivery terms.

  • Delivery to your specified location
  • DDP quote whenever we can
  • On-site installation and operator training by our team
Question 10

Is installation and training included with a fiber laser?

Short answer

Yes. Every fiber laser includes on-site installation, alignment, commissioning and test cuts by our team. Operator training happens at your facility, so your crew learns on the machine they will run.

  • On-site installation
  • Alignment
  • Commissioning
  • Test cuts
Question 11

What warranty comes with a fiber laser?

Short answer

You get 2 years on the machine and parts. Consumables are excluded. You also get a 1-year replacement guarantee on the power source.

  • 2 years on the machine and parts
  • 1-year replacement guarantee on the power source
  • Consumables excluded
Question 12

Can I finance a fiber laser?

Short answer

Yes. You can finance any machine we sell with structured payments through our lending partner, Direct Capital, subject to credit approval. That way production can start before the full cost is due.

  • Get your quote. It covers the machine, installation and training.
  • Apply online with Direct Capital for structured monthly payments.
  • Once approved, we deliver, install and train your team.
Question 13

What should I ask a fiber laser supplier before buying?

Short answer

Ask who installs the machine, who answers when it stops, which parts are stocked in the U.S., and what the warranty covers and excludes. Also ask which brands the laser source and cutting head are, and what the delivered price leaves out. The answers separate a seller from a partner.

  • Who installs the machine, and where are they based?
  • Who answers when the machine stops, and at what hour?
  • Which parts are stocked in the U.S.?
  • What does the warranty cover, and what does it exclude?
  • Which brands are the laser source and the cutting head?
  • What is the delivered price, and what does it leave out?
Question 14

Do I need a press brake after a fiber laser?

Short answer

If the parts you cut get bent into brackets, channels, chassis or enclosures, a CNC press brake lets you bend them in-house. We supply CNC press brakes from 60 to 300+ tons that pair with your laser. They are installed and trained the same way as our lasers.

  • Capacity: 60 to 300+ ton
  • Work length: 4', 6', 8', 10', 12'; custom available
  • 3-axis or 3+1 axis standard; optional 5-axis
  • Hydraulic or servo-electric drive
Question 15

What materials can a fiber laser cut?

Short answer

A fiber laser cuts mild steel, stainless steel, aluminum, copper, brass, galvanized steel and titanium. How thick it cuts depends on wattage and material. Tell us your thickest steel and we size the machine to it.

  • Mild steel
  • Stainless steel
  • Aluminum
  • Copper
  • Brass
  • Galvanized steel
  • Titanium
Question 16

What support do I get after buying a fiber laser?

Short answer

You get 24/7 engineering support by phone or email, worldwide, and spare parts stocked in Tucson, Arizona. Your machine is covered for 2 years on the machine and parts, consumables excluded, plus a 1-year replacement guarantee on the power source. We do not disappear after the sale.

  • Engineering support: 24/7 by phone or email, worldwide.
  • Parts: spare parts stocked in Tucson, Arizona.
  • Warranty: 2 years on the machine and parts. Consumables excluded. Plus a 1-year replacement guarantee on the power source.

More detail in the Fiber Laser Sales buying guide.

Put it to work now. Pay over time.

Financing runs through Direct Capital, subject to credit approval. Which payment fits your cash flow? Ask us to quote it.